XP500

XP 500

Overview

Some applications may require a higher number of inputs and/or outputs as those already available on the WE500 and WE300. In such a case it’s possible to expand the WE500 and WE300 with additional digital outputs/inputs and analogue outputs/inputs, by adding expansion modules of the XP500/ETH line. These expanders can be easily installed and configured, following the user-friendly procedure available inside the webinterface of the WE500 and WE300.

The XP500 expanders communicate with the device through Modbus RTU Protocol on RS-485 and are all slave, for this reason it’s possible to connect to a single device several expanders, that may also be used with any other Modbus Master device.

Technical characteristics

4AI-I

The module 4AI-I allows to expand the device with 4 analogue inputs in current. The expander communicates through Modbus Protocol on RS-485
Description
Modbus expansion with 4 current analog inputs
Analog inputs
Number of input channels: 4. Min current: -20 mA. Max current: +20 mA. Impedance: <= 50 Ohm. Sampling time: 0.5 - 1 sec
Serial port
Type: RS-485. Protocol: Modbus RTU (Slave). Baudrate: up to 38400 bps.
Power source
10 / 30 VDC
Average absorption
30 mA @ 24 VDC
Polarity inverse protection
60 VDC max
Isolation
2000 VAC 50Hz, 1min
Working temperature
-10°C / +60°C
Storage temperature
-40°C / +85°C
Humidity
0 / 90% (not condensing)
Dimensions
(w x h x l) 17.5 x 100 x 120 mm
Weight
150 gr
Enclosure
DIN-BAR mountable dark gray plastic
CE standards
EN 61000-6-2, EN 61000-6-4

8AI-I

The module 8AI-I allows to expand the device with 8 analogue inputs in current. The expander communicates through Modbus Protocol on RS-485
Description
Modbus expansion with 8 current analog inputs
Analog inputs
Number of input channels: 8. Min current: -20 mA. Max current: +20 mA. Impedance: <= 50 Ohm. Sampling time: 0.5 - 1 sec
Serial port
Type: RS-485. Protocol: Modbus RTU (Slave). Baudrate: up to 38400 bps.
Power source
10 / 30 VDC
Average absorption
30 mA @ 24 VDC
Polarity inverse protection
60 VDC max
Isolation
2000 VAC 50Hz, 1min
Working temperature
-10°C / +60°C
Storage temperature
-40°C / +85°C
Humidity
0 / 90% (not condensing)
Dimensions
(w x h x l) 17.5 x 100 x 120 mm
Weight
150 gr
Enclosure
DIN-BAR mountable dark gray plastic
CE standards
EN 61000-6-2, EN 61000-6-4

4AI-V

The module 4AI-V allows to expand the device with 4 analogue inputs in tension. The expander communicates through Modbus Protocol on RS-485
Description
Modbus expansion with 4 voltage analog inputs
Analog inputs
Number of input channels: 4. Min voltage: -10 V. Max voltage: +10 V. Impedance: > 100 KOhm. Sampling time: 0.5 - 1 sec
Serial port
Type: RS-485. Protocol: Modbus RTU (Slave). Baudrate: up to 38400 bps.
Power source
10 / 30 VDC
Average absorption
30 mA @ 24 VDC
Polarity inverse protection
60 VDC max
Isolation
2000 VAC 50Hz, 1min
Working temperature
-10°C / +60°C
Storage temperature
-40°C / +85°C
Humidity
0 / 90% (not condensing)
Dimensions
(w x h x l) 17.5 x 100 x 120 mm
Weight
150 gr
Enclosure
DIN-BAR mountable dark gray plastic
CE standards
EN 61000-6-2, EN 61000-6-4

8AI-V

The module 8AI-I allows to expand the device with 8 analogue inputs in current. The expander communicates through Modbus Protocol on RS-485
Description
Modbus expansion with 8 voltage analog inputs
Analog inputs
Number of input channels: 8. Min voltage: -10 V. Max voltage: +10 V. Impedance: > 100 KOhm. Sampling time: 0.5 - 1 sec
Serial port
Type: RS-485. Protocol: Modbus RTU (Slave). Baudrate: up to 38400 bps.
Power source
10 / 30 VDC
Average absorption
30 mA @ 24 VDC
Polarity inverse protection
60 VDC max
Isolation
2000 VAC 50Hz, 1min
Working temperature
-10°C / +60°C
Storage temperature
-40°C / +85°C
Humidity
0 / 90% (not condensing)
Dimensions
(w x h x l) 17.5 x 100 x 120 mm
Weight
150 gr
Enclosure
DIN-BAR mountable dark gray plastic
CE standards
EN 61000-6-2, EN 61000-6-4

4DI-4DO

The module 4DI-4DO allows to expand the device with 4 digital inputs and 4 digital outputs. The expander communicates through Modbus Protocol on RS-485
Description
Modbus expansion with 4 digital inputs and 4 digital outputs
Digital inputs
Number of input channels: 4. State OFF: 0 - 3 V. State ON: 10 - 30 V. Impedance: 4.7 KOhm
Digital outputs
Minimum load: 5 VDC, 10 mA. Maximum voltage: 250 Vca (50 / 60 Hz), 110 VDC
Number of output channels
2 relay SPDT/2 relay SPST N.A.
Commutable power (max)
2A @ 250 Vca per contact/2A @ 30 VDC per contact
Serial port
Type: RS-485. Protocol: Modbus RTU (Slave). Baudrate:up to 38400 bps
Sampling time
5 ms (max)
Power source
18 / 30 VDC
Average absorption
45 mA @ 24 VDC
Polarity inverse protection
60 VDC max
Isolation
2000 VAC 50Hz, 1min.
Working temperature
-10°C / +60°C
Storage temperature
-40°C / +85°C
Humidity
0 / 90% (not condensing)
Dimensions
(w x h x l) 17.5 x 100 x 120 mm
Weight
150 gr
Enclosure
DIN-BAR mountable dark gray plastic
CE standards
EN 61000-6-2, EN 61000-6-4

8DI-8DO

The module 8DI-8DO allows to expand the device with 8 digital inputs and 8 digital outputs. The expander communicates through Modbus Protocol on RS-485
Description
Modbus expansion with 8 digital inputs and 8 digital outputs
Digital inputs
Number of input channels: 8. State OFF: 0 - 3 V. State ON: 10 - 30 V. Impedance: 4.7 KOhm
Digital outputs
Number of output channels: 8 PNP. Minimum load: 4 VDC, 10 mA. Maximum voltage: 250 Vca (50 / 60 Hz), 110 VDC
Commutable power (max)
2A @ 250 Vca per contact. 2A @ 30 VDC per contact
Serial port
Type: RS-485. Protocol: Modbus RTU (Slave). Baudrate:up to 38400 bps
Sampling time
5 ms (max)
Power source
10 / 30 VDC
Average absorption
45 mA @ 24 VDC
Polarity inverse protection
60 VDC max
Isolation
2000 VAC 50Hz, 1min.
Working temperature
-10°C / +60°C
Storage temperature
-40°C / +85°C
Humidity
0 / 90% (not condensing)
Dimensions
(w x h x l) 17.5 x 100 x 120 mm
Weight
150 gr
Enclosure
DIN-BAR mountable dark gray plastic
CE standards
EN 61000-6-2, EN 61000-6-4

12DI

The module 12DI allows to expand the device with 12 digital inputs. The expander communicates through Modbus Protocol on RS-485
Description
Modbus expansion with 12 digital inputs
Digital inputs
Number of input channels: 12 (0 to 7 suitable for counters). State OFF: 0 - 3 V. State ON: 10 - 30 V. Impedance: 4.7 KOhm
Serial port
Type: RS-485. Protocol: Modbus RTU (Slave). Baudrate:up to 38400 bps
Sampling time
5 ms (max)
Power source
10 / 30 VDC
Average absorption
45 mA @ 24 VDC
Polarity inverse protection
60 VDC max
Isolation
2000 VAC 50Hz, 1min.
Working temperature
-10°C / +60°C
Storage temperature
-40°C / +85°C
Humidity
0 / 90% (not condensing)
Dimensions
(w x h x l) 17.5 x 100 x 120 mm
Weight
150 gr
Enclosure
DIN-BAR mountable dark gray plastic
CE standards
EN 61000-6-2, EN 61000-6-4

4T

The module 4T allows to expand the device with 4 analogue inputs configurable to support the most common temperature probes available on the market. The expander communicates through Modbus Protocol on RS-485.

Type Min Max
Description
Modbus expansion with 12 digital inputs
Input type: RTD
Pt100
-200°C
850°C
Pt1000
-200°C
200°C
Ni100
-60°C
80°C
Ni1000
-60°C
150°C
Input type: Resistor 2 or 3 wires
Low
0 Ohm
50 Ohm
High
0 Ohm
2000 Ohm
Input type: Potentiometer
Low
20 Ohm
500 Ohm
High
20 Ohm
2000 Ohm
Input calibration
±0,05 %
Linearity
±0,05 % (RTD only)
Serial port
Type: RS-485. Protocol: Modbus RTU (Slave). Baudrate:up to 38400 bps
Sampling time
5 ms (max)
Power source
10 / 30 VDC
Average absorption
30 mA @ 24 VDC
Polarity inverse protection
60 VDC max
Isolation
2000 VAC 50Hz, 1min.
Working temperature
-10°C / +60°C
Storage temperature
-40°C / +85°C
Humidity
0 / 90% (not condensing)
Dimensions
(w x h x l) 17.5 x 100 x 120 mm
Weight
150 gr
Enclosure
DIN-BAR mountable dark gray plastic
CE standards
EN 61000-6-2, EN 61000-6-4

Combo

The Combo module is the most complete expander in the range and allows to configure the following: 1 universal analogue input (tension/current/temp.probe). 1 analogue input in tension or current. 2 analogue outputs. 3 digital inputs. 3 digital outputs one solid state and two relay

The expander communicates through Modbus Protocol on RS-485

Type Min Max Precision Linearity
Descriptions
Modbus expansions with multiple analog/digital I/O
Universal Analog input
100 mV
-100 mV
100 mV
±0,05 %
±0,1 %
1 V
-100 mV
1 V
±0,05 %
±0,1 %
10 V
-10 V
10 V
±0,05 %
±0,1 %
20 mA
-20 mA
20 mA
±0,05 %
±0,1 %
Pt100
-200 °C
850 °C
±0,05 %
±0,1 %
Pt1000
-200°C
200 °C
±0,05 %
±0,1 %
Ni100
-60 °C
180 °C
±0,05 %
±0,1 %
Ni1000
-60 °C
150 °C
±0,05 %
±0,1 %
Res
0 Ohm
2000 Ohm
±0,05 %
±0,1 %
Pot
0 %
100 %
±0,05 %
±0,1 %
Tc J
-210 °C
1200 °C
±0,05 %
±0,1 %
Tc K
-210 °C
1370 °C
±0,05 %
±0,1 %
Tc R
-50 °C
1760 °C
±0,05 %
±0,1 %
Tc S
-50 °C
1760 °C
±0,05 %
±0,1 %
Tc B
+400 °C
1825 °C
±0,05 %
±0,1 %
Tc E
-210 °C
1000 °C
±0,05 %
±0,1 %
±0,05 %
±0,05 %
±0,05 %
±0,05 %
±0,1 %
Serial port
Type: RS-485. Protocol: Modbus RTU (Slave). Baudrate:up to 38400 bps
Sampling time
5 ms (max)
Power source
10 / 30 VDC
Average absorption
45 mA @ 24 VDC
Polarity inverse protection
60 VDC max
Isolation
2000 VAC 50Hz, 1min.
Working temperature
-10°C / +60°C
Storage temperature
-40°C / +85°C
Humidity
0 / 90% (not condensing)
Dimensions
(w x h x l) 17.5 x 100 x 120 mm
Weight
150 gr
Enclosure
DIN-BAR mountable dark gray plastic
CE standards
EN 61000-6-2, EN 61000-6-4