ODOT CN-8031:MODBUS TCP NETWORK ADAPTER

Product Feature:

ODOT CN-8031 Modbus TCP Adapter

CN-8031 Modbus TCP Network Adapter supports the standard Modbus TCP Server Communication, and Ethernet supports the cascade function of dual-port switches.This adapter supports access to 5 Modbus TCP clients simultaneously, supports Modbus function code 01/02/03/04/05/06/15/16 /23, supports the Modbus application of watchdog, supports the process data maximum sum of input and output of 8192 bytes, and supports number of the extension IO module of 32. Module carries with the diagnostic function and it could monitor the communication status of IO module in real time.

Product Details

Technical Parameters

Hardware Specification
System Power
Nominal: 24Vdc. Range: 9-36Vdc. Reverse Protection: YES.
Power Consumption
50mA@24Vdc
Current Output
Max. 2.5A@5VDC
Isolation
System Power to Field Power Isolation
Field Power
Nominal:24Vdc
Range
22-28Vdc
Field Power Contact
Max. 8A
Expansion Module
32 slots
Wiring
Max.1.5mm² (AWG 16)
Mounting Type
35mm DIN-Rail
Size
115*51.5*75mm
Weight
130 g
Environment Specification
Operational Temperature
-40~85℃
Operational Humidity
5%-95% (No Condensation)
Protection Class
IP20
Communication Interface Specification
Protocol
Modbus-TCP
Process Data Area
Sum of input and output:8192 Byte
Diagnostic Function
Supported
Modbus Data Storage Area
0xxxx area (Coil)
8192 Bit
1xxxx area (Discrete input)
8192 Bit
3xxxx area (Input register)
2048 Word
4xxxx area (Holding register)
2048 Word
3xxxx area (System diagnostics - state input)
105 Word
4xxxx area (System diagnostics - control output)
1 Word Number of TCP:5 Clients
TCP Keepalive
YES
Modbus Watchdog
YES (Default:Enable, 30 Seconds)
Function Code
01/02/03/04/05/06/15/16/23
Network Interface
RJ45x2
Speed
10/100Mbps, MDI/MIDX, Full-Duplex
Distance
100m
IP Address
DIP switch set or IO-Config software set